ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
11
9
5. Setting up the device
Activation / deactivation of the programming lock or completion of the standard
parameterisation with change into menu group level (complete function range),
run:
Default:
uloc
With the navigation keys
[
▲
] [
▼
]
, choose between the deactivated key lock
Uloc
(works
setting) and the activated key lock
Loc
, or the change into the menu group level
ProF
. Confirm
the selection with
[P]
. After this, the display confirms the settings with
"
- - - - -"
, and auto-
matically switches to operating mode. If
Loc
was selected, the keyboard is locked. To get back
into the menu level, press
[P]
for 3 seconds in operating mode. Now enter the
CODE
(works
setting
1 2 3 4
) that appears using
[
▲
] [
▼
]
plus
[P]
to unlock the keyboard.
FAIL
appears if the
input is wrong. To parameterise further functions
ProF
needs to be set. The device confirms this
setting with
„
- - - - -
„
and changes automatically in operation mode. By pressing
[P]
for approx.
3 seconds in operation mode, the first menu group
InP
is shown in the display and thus confirms
the change into the extended parameterisation. It stays activated as long as
ULOC
or
LOC
is
entered in menu group
RUN
.
Parameterisation level
Menu level
5.4. Extended parametrisation
(Professional operation level)
Selection of the input signal,
TYPE:
Default:
Su.060
There are several measuring input options: 60, 150, 300 or 1000 mV signals are available as
works calibration (without application of the sensor signal) and
SU
as sensor calibration (with
the sensor applied). Confirm the selection with
[P]
and the display switches back to menu level.
Parameterisation level
Menu level
Menu group level
Menu level
5.4.1. Signal input parameters
5.3 Programming interlock „
RUN
“
