Acme Packet Net-Net 6300, Hardware Installation Manual

Page: 51 / 116

SYSTEM INSTALLATION
Version 1.0 Acme Packet, Inc. Technical Publications 47
To install your Net-Net 6300 in a center-mount configuration:
1. Locate the following components:
• 2 x center-mounting ears
•
6 x 10-32 x 5/16" flat head (black) screws
2. Line up one chassis ear with the tapped holes as shown in the following image.
3. Use 3 x 10-32 x 5/16" flat head (black) screws to secure the 19 inch chassis ear to
the chassis. Final installation resembles the image below.
4. Repeat this procedure for the other side of the Net-Net 6300.
Installing the Chassis
in the Rack You now will lift the Net-Net 6300 and install it into the rack. To prevent personal
injury or damage to the Net-Net 6300 follow these guidelines:
•
This installation requires two people and should not be attempted otherwise.
•
Follow your organization’s best practices for lifting and installing heavy
components into an equipment rack.
•
Ensure that the Net-Net 6300 remains supported until you have completely
installed it into the equipment rack.
1. Locate the following components:
•
4 x equipment rack screws
2. Lift the Net-Net 6300 into the correct position in the equipment rack.