Acme Packet Net-Net 6300, Hardware Installation Manual

Page: 20 / 116

18 Net-Net 6300 Hardware Installation Guide Version 1.0
COMPONENT OVERVIEW
control, RADIUS accounting, CLI management, SNMP queries and traps, and other
management functions.
Ethernet LED
Each Ethernet jack has two integrated LEDs: one to indicate Link, and one to
indicate Activity. The LED pair is located directly above its associated port.
Link LED
The link LED is located on the top left side of the Ethernet port. This Link LED
illuminates orange when link has been established between the link partner device
and the Net-Net SBC.
Activity LED
The activity LED is located to the top right side of the Ethernet port. It illuminates
green when an Ethernet connection has either transmit or receive packet activity.
Upon initial bootup, these Ethernet ports are not configured. You must first connect
to the Net-Net 6300 over a serial connection before you can configure the
management Ethernet ports for use. You set up the management interfaces using
the physical and network interface configuration elements. Refer to the
System
Configuration chapter of the Net-Net Configuration Guide for details.
Once the management network interface is configured, it should be reserved for the
following: