Acme Packet Net-Net 6300, Hardware Installation Manual

Page: 50 / 116

46 Net-Net 6300 Hardware Installation Guide Version 1.0
SYSTEM INSTALLATION
3. Push the Net-Net 6300 fully into the equipment rack.
4. Line up the chassis-mounted thumb screws with the threads on the mounting
spacer. You may have to adjust the spacer locations before they line up with the
Net-Net 6300 captive screws.
5. Once correctly positioned, screw the thumb screws into the mounting spacer
and secure the chassis in the rack.
6. Fully tighten all 4, 10-32 x 5/8” front screws that hold the stationary rails to the
rack.
Center-mount 2-Post Chassis Installation
The following sections explain how to mount your Net-Net 6300 in a center-mount,
2-post equipment rack. The Net-Net 6300 in a center mount installation looks like
this:
Installing the
Center-mount
Hardware
Center mounting ears are attached to each side of the Net-Net 6300. These
mounting ears are reversible, and are not mated to a specific side of the chassis.
While the Net-Net 6300 is shipped with all mounting hardware for attaching the
rack ears to the chassis, you must obtain and use the appropriate hardware
recommended by the equipment rack’s manufacturer for mounting the system in the
rack.