Acme Packet Net-Net 6300, Hardware Installation Manual

Page: 41 / 116

SYSTEM INSTALLATION
Version 1.0 Acme Packet, Inc. Technical Publications 37
Center mounting ears 19 inch (2 x shipped)
Cabinet-style 4-Post Chassis Installation
The following sections explain how to mount your Net-Net 6300 in a cabinet-style,
4-post equipment rack.
Mounting System
Acme Packet provides flexible mounting options for your Net-Net 6300 equipment
rack installation.
Stationary slides are mounted on each side of the equipment rack. Complimentary
chassis slides are mounted on each side of the Net-Net 6300. Once the equipment
rack and Net-Net 6300 hardware is in place, insert the chassis, on its slides into the
equipment rack mounted slides. When the Net-Net 6300 is fully inserted into the
equipment rack, it is secured in place with two thumb screws and 4 rack screws.
Installing the
Stationary Slides
In this first stage of system installation, you secure the stationary slide to the
equipment rack. The painted end of the stationary rail is attached to the front of the
equipment rack and the bare steel side is attached to the rear of the equipment rack.
The stationary rail can expand and contract to accommodate equipment racks of
various depths.
You can mount the stationary rail to both tapped hole rack rails and square rack rails.
Follow the appropriate procedure below.
Slide Extender
Installation This sections applies to both tapped and square hole installations. If the distance
between the equipment rack’s front and rear rails is between 28” and 32” (71.1 cm
and 81.3 cm), the slide extenders are required for mounting the system. Attach these
slide extenders to the stationary slides as a preliminary step in Net-Net 6300 System
installation.