Acer TravelMate 720 User Manual Download Page 84

Page: 84 / 135

Disconnecting from the Desktop

User’s Guide

Disconnecting from the Desktop

Follow these steps to disconnect your computer from
external accessories:

Save your work in progress.

Remove any media, diskette and compact disc, from the
drive(s).

Shut down the operating system.

Turn off the computer.

Disconnect the cord from the AC adapter.

Disconnect the keyboard, pointing device, printer,
external monitor, and other external devices.

If your external devices are connected to the optional
mini docking station, disconnect the notebook from the
mini docking station. You do not need to disconnect the
external devices from the mini docking station.

Disconnect the Kensington lock if you are using one to
secure the computer.

720-e.book : 720-4e.fm Page 64 Thursday, December 3, 1998 10:43 AM

Summary of Contents for TravelMate 720








































































































































Search results

Summary of Contents for TravelMate 720

Reviews:

Acer TravelMate 720, User Manual, Page: 84 / 135

Search results

Summary of Contents for TravelMate 720

Reviews: