manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 55 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 55

Battery Pack

Chapter 2  Operating on Battery Power 

35

❑

Charge-in-use mode

When the computer is in use with the AC adapter 
plugged in, the computer also charges the battery pack if 
installed.  This mode will take longer to fully charge a 
battery than rapid mode.  In charge-in-use mode, a fully 
depleted battery gets fully charged in approximately 
three to four hours.

❑

Trickle mode

When the battery is fully charged, the adapter changes 
to trickle mode to maintain the battery charge level.  
This prevents the battery from draining while the 
computer is in use.

Checking the Battery Level

The computer features battery-low warning signals that are 
both audible and visible.  When the battery pack is low, the 
computer emits warning beeps and the battery indicator 
flashes at regular intervals.  Also, you can check the battery 
charge level using the Windows battery gauge.

Using the Windows Battery Meter

The Windows battery meter indicates the present battery 
level.  Simply rest your cursor on the battery gauge (or AC 
plug) icon on the taskbar to see the present charge level of 
your battery.  You can also double-click on this icon for 
detailed information on your battery pack.

Note: 

We suggest that you charge the battery pack before 

retiring for the day, letting it charge overnight before 
traveling.  This ensures a fully charged battery for use the 
next day.

720-e.book : 720-2e.fm  Page 35  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments