manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 64 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 64

External Monitor

44

 User’s Guide

External Monitor

To show graphical effects on a larger display, connect an 
external monitor to the CRT port.  Read the monitor 
manual for additional instructions.   

Using Dual Display

Your computer takes advantage of Windows 98 multi-
display capability, allowing you to expand your desktop to 
an external display device.  This gives you more desktop 
space to work on.

To use dual display, you can choose to connect other 
output display devices to the computer either through the 
CRT port or the S-video output jack.  The S-video output 
jack is especially useful for presentation and entertainment 
as it allows you to display your computer output to a 
television monitor or LCD projector or extend it with dual 
display enabled.

Note: 

If an external monitor is not connected, closing the 

display cover puts the computer into standby mode.

720-e.book : 720-3e.fm  Page 44  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments