manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 13 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 13

xiii

This manual describes features of the TravelMate 720 series 
notebook computers.  This series of computers incorporate 
such features as CardBus, PCI-based 16-bit 3D audio, Fast 
Infrared, internal pointing device, Universal Serial Bus, 
Accelerated Graphics Port and all-in-one media storage.

This manual should answer most of the questions you have 
about the day-to-day operation of your TravelMate notebook 
computer.

Use the 

Just for Starters…

 instructions that came with your 

computer to get your computer running for the first time.

You should also take advantage of the online help files that 
are available with almost all of the programs shipped with 
your computer.

We hope you enjoy your TravelMate computer.  With proper 
care, your computer will provide you with years of 
productive service.

Preface

720-e.book : 720-ePRE.fm  Page xiii  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments