manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 128 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 128

Specifications

108

 User’s Guide

Audio

❑

16-bit PCI stereo audio with 3-D sound and built-in 
wavetable synthesizer

❑

Dual speakers and internal microphone with echo-
cancellation feature

❑

Sound Blaster Pro- and Windows Sound System-
compatible

❑

Separate audio ports for line-out and line-in/
microphone-in devices

Keyboard and Pointing Device

❑

84-/85-/88-key Windows keyboard

❑

Ergonomically-centered touchpad pointing device

I/O Ports

❑

Two type II/I or one type III CardBus socket(s)

❑

One modem jack (V.90-compliant 56Kbps modem)

❑

One DC-in jack (AC adapter)

❑

One FIR wireless communications port (IrDA-compliant)

❑

One RS-232 serial port (UART16550-compatible)

❑

One parallel port (ECP-compliant)

❑

One external monitor port (DDC 2.0-compliant)

❑

One keyboard/mouse port (PS/2-compatible)

❑

One mini docking station connector

❑

One speaker-/headphone-out jack

❑

One line-in/microphone-in jack

❑

One USB port

❑

One S-video output jack

720-e.book : 720-ae.fm  Page 108  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments