manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 110 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 110

Setup Utility

90

 User’s Guide

   Mode

Sets the operation mode of the parallel port.

Options: 

ECP

, Bi-directional, or Output only

Speaker 
Default

Enables or disables the internal speakers on 
boot-up.  You can override this by toggling 

Fn-F8

 

during computer operation.

Options: 

Enabled

 or Disabled

Microphone/
Line-In

Specifies the function of the microphone/line-in 
audio jack.

Options: 

Microphone

 or Line-In

Boot Display

Sets the display on boot-up.

When set to Auto, the computer automatically 
determines the display device.  If an external 
display device (e.g., monitor) is connected, it 
becomes the boot display; otherwise, the 
computer LCD is the boot display.  When set to 
Both, the computer outputs to both the 
computer LCD and an external display device if 
one is connected.

Options: 

Auto

 or Both

Parameter

Description

720-e.book : 720-5e.fm  Page 90  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments