manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 56 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 56

Battery Pack

36

 User’s Guide

Optimizing Battery Life

This section helps you get the most out of battery operation.  
Optimizing battery life prolongs the charge/recharge cycle 
and improves recharge efficiency.  Follow these suggestions 
to optimize and maximize battery power:

❑

Purchase an extra battery pack.

❑

Use the PhDISK utility to reserve hard disk space for the 
Hibernation function.  See “PhDISK” on page 73.

❑

Use the AC adapter whenever possible so that the 
battery is reserved for on-the-go computing.

❑

Keep the battery pack in the computer powered by the 
AC adapter.  The constant trickle charge maintains the 
battery level to eliminate the battery self-discharge 
effect.  The charge-in-use function also charges the 
battery pack.

❑

Disable the parallel and serial ports if no devices are 
connected to these ports.  You can do this through the 
Setup Utility.  See “Advanced” on page 89.

❑

Eject the PC card from the card slot when not in use, 
since the PC card draws extra power.

❑

Store the battery pack in a cool, dry place.  The 
recommended storage temperature for battery packs 
ranges from 10 to 30 degrees C.  The higher the storage 
temperature, the faster the battery pack self-discharges. 

❑

The batteries can be recharged about 300 times when 
used as directed.  Excessive recharging decreases 
battery life.

❑

Take care of your battery pack and AC adapter.  See 
“Care and Maintenance” on page xviii of the preface.

720-e.book : 720-2e.fm  Page 36  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments