manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 120 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 120

Frequently-Asked Questions

100

 User’s Guide

External microphone or audio line-in device does not work.

Check the following: 

❑

Make sure the external microphone or audio line-in 
device is connected to the line-in/microphone-in jack on 
the computer's rear panel. 

❑

If you cannot hear playback, the speakers may be 
muted. 

❑

Make sure the line-in/microphone-in jack is configured 
for the appropriate source. Run Notebook Manager and 
click on the Line-in/Microphone tab and set the input 
source correctly. Click on 

Apply

 to accept.  

I want to eject the CD-ROM tray without turning on the 
power.  I cannot eject the CD-ROM drive tray.

There is a mechanical eject button on the CD-ROM drive.  
Simply insert the tip of a pen or paperclip and push to eject 
the CD-ROM tray. 

720-e.book : 720-6e.fm  Page 100  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments