manualshive.com logo in svg

Acer TravelMate 720, User Manual, Page: 37 / 135

Share
Download
Acer TravelMate 720 User Manual Download Page 37

Storage

Chapter 1  Getting Familiar with your Computer 

17

Storage

This computer supplies you with all-in-one media storage:

❑

High-capacity Enhanced-IDE hard disk

❑

Standard ultra-slim internal 3.5-inch floppy drive

❑

High-speed CD-ROM drive (swaps with other 
AcerMedia Bay modules)

Hard Disk

The removable hard disk module can be upgraded when 
you need more storage space.  See “Hard Disk Upgrade” on 
page 61.

Floppy Drive

The ultra-slim internal floppy drive reads and writes 
standard 3.5-inch diskettes.

Ejecting a Floppy Disk

Press the floppy disk eject button to eject a floppy disk from 
the floppy drive.

AcerMedia Bay

A high-speed CD-ROM drive module sits in the AcerMedia 
Bay on the right side of the computer.  The CD-ROM drive 
gives you portable multimedia access.

720-e.book : 720-1e.fm  Page 17  Thursday, December 3, 1998  10:43 AM

Summary of Contents for TravelMate 720








































































































































Reviews:

No comments