129
6
Select
Array Type
.
7
Configure the array properties.
8
Press
Done
when finish.
9
Press
Y
when prompted by "Do you want to create an array? (Yes/
No):".
10 Press any key to continue.
11 Now that the RAID volume is created, you can press <
ESC
> to exit.
Assigning Hot Spare drive
A hot spare is a hard disk drive that automatically replaces any failed drive
in a RAID volume, and can subsequently be used to rebuild the RAID
volume.
1
Select
Array Configuration Utility
option.
2
Select
Add/Delete Hotspare
.
3
The screen displays
Select drives to assign Spare
.
4
Select desired hard drive disk and then press <
INS
> to add it in
Assigned Hotspare drives
area.
5
Press <
Enter
> to complete the selection.
6
Press
Y
when prompted by "Do you want to create a spare? (Yes/No):"
displayed.
7
Now a hot spare drive is created, you can press <
ESC
> to exit.
Summary of Contents for AR360 F1 Series
