![background image](http://html.mh-extra.com/html/acer/altos-g900/altos-g900_user-manual_5830195.webp)
179
9
In the Blackout Period box, enter the minimum time, in minutes,
between successive pages. The valid range is [0 - 255] where 0
disables the blackout period.
Setting a blackout period can save you from being flooded with
repeat pages. After you receive a PEP page, no additional pages
are sent by PEP for the duration of the blackout period.
10 In the Paging String box, enter the phone number to dial for the
page and the message you want sent with the page. The
maximum length for the paging string is determined at run-time
from the firmware.
You will be notified if the string is truncated. Following a save, the
actual string saved is displayed in the edit box.
11 From the Options menu, choose
Configure Event Actions
.
12 In the Platform Event Paging Actions window, move the events
that you want to generate an alert to the Enabled column and
move all other events to the disabled column using the following
buttons:
13 Click
Save
to save the changes.
14 Click
Close
to return to the PEP Configuration window.
15 To send a test page to verify that you have correctly configured
PEP, from the Options menu, choose
Send Alert
.
16 Click
Save
to save the configuration.
17 Click
Close
to return to the Platform Event Manager window.
•
>>
Moves all events from the enabled list to the
disabled list.
•
>
Moves the selected event from the enabled list to
the disabled list.
•
<
Moves the selected event from the disabled list to
the enabled list.
•
<<
Moves all events from the disabled list to the
enabled list.
AA G900 ug - EN.book Page 179 Wednesday, September 25, 2002 5:23 PM
Summary of Contents for Altos G900
