Accurate Technology ProPanel Classic, Instruction Manual

Page: 12 / 44

P/N 800-1090-104 Rev L102012 Page 12 of 44
S
ECTION
3 R
EADOUT
O
PERATION
All of the available functions of the Readout are included in this section. The
operations & functions that
DO NOT apply to ProPanel are shown Grayed
Out . If a different Readout is used on your ProPanel system, refer to the
Operation Manual for that readout.
Key Timing
Several keys on the Readout have multiple functions. The function executed
when the key is depressed is dependent on how long the key is depressed.
Therefore, how long the key is depressed is important.
This manual use
s the term “
Momentarily
” to describe a key depression of less
than .8 seconds, and
“Press and Hold ” to describe a key depression of longer
than 1 second.
For
Momentary operations the Function is executed when the key is released.
For Press & Hold operations the Function is executed after the key has been
depressed for the prescribed amount of time.
See a video demonstration of key timing HERE .
See the chart below for a summary of the functions performed by the Readout
keys pictured below.:
Momentarily Press & Hold
How long a key is pressed? Less than .8 seconds More than 1 second
When is the key function executed? On key release While holding
Momentarily Press & Hold
On/Off Key Turns Readout power On or Off No effect
Units Key
Cycles through measurement
units: inches, fractions, mm
No effect
Plus (+) Key Increments displayed value Increments faster
Datum Key
Forces displayed reading to
programmed Datum value
After 6 seconds displays battery
voltage
After 9 seconds displays Temperature
Minus (-) Key Decrements displayed value Decrements faster