ProPanel Classic
Page 37 of 44
Pr24
– Special Functions
[0 to 4]
This parameter controls which
Default Value = 0
Pr25
– Special Function Variable
[0 to 16]
The parameter may be used by a special function to customize it’s operation.
See
for instances when this parameter is
used.
Default Value = 0
Pr26
–
Drift Tolerance
[.01 - 3048 mm] or [.001 - 120 in]
This parameter sets the amount of drift that must occur in MONitor mode to
trigger a drift indication.
Default Value = .01 in
NOT APPLICABLE FOR PROPANEL SYSTEMS.
Pr27
– Upper/Lower Limits
[0 or 1]
This parameter Enables/Disables the use of the
(Set Pr 28 to the lower limit & Pr 29 to the upper limit).
Default Value = 0
Pr28
– Lower Limit
[0 to ± 999.999in] or [0 to ± 9999.99mm]
This value sets the lower limit of Upper/Lower Limits function when Pr27 = 1.
Default Value = 0.000
Pr29
– Upper Limit
[0 to ± 999.999in] or [0 to ± 9999.99mm]
This value sets the upper limit of Upper/Lower Limits function when Pr27 = 1.
Default Value = 5.000 in. (127.00mm)
Pr24 Setting
Advanced Readout Function
0
None
1
F3 = MON, F4 = HOLD, F2 = Delete
2
Go/NoGo
3
Measurement Accumulation
4
Statistics
Pr 27 Setting
Upper/Lower Limits Function
0
Function DISABLED
1
Function ACTIVE
