![background image](http://html1.mh-extra.com/html/acclaim-lighting/ai-flex-interior/ai-flex-interior_user-manual_3695490032.webp)
30
www.acclaimlighting.com
+24
V
W1
W2
W3
W4
TO SURFACE MOUNT A CHANNEL ON A
DRYWALL CEILING
1 If necessary, carefully solder to the contact pads or
use a feed/link cable (see page 5).
Note: If you
need to fit
Channel end caps
, you will need to drill a
hole in the end cap at one end to allow the cables to
pass thru.
2 Fit the Ai Flex tape to the channel
3 Fit the required lens (see page
4 At each end of the channel
(underside), insert a
Surface spring
into the center slot.
5 Measure the distance between
the two springs and in the ceiling
panels make two small holes to
accommodate the springs.
6 At each end of the channel, squeeze
the springs and insert them into
the holes in the ceiling panel. Once
inside, the springs should open
out to keep the channel securely in
position.
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...