![background image](http://html1.mh-extra.com/html/acclaim-lighting/ai-flex-interior/ai-flex-interior_user-manual_3695490022.webp)
20
www.acclaimlighting.com
+24V
W1
W2
W3
W4
TO MOUNT THE CHANNEL
1 If necessary, carefully solder to the contact
2 Fit the Ai Flex tape to the channel (see page
3 Attach two, preferably three,
Swivel mounting
brackets
to the mounting surface using either
glue, adhesive pads or screws appropriate to
the surface type.
4 Clip the channel into the swivel mounting
brackets.
5 Adjust the angle as required:
TO FIT A LENS
1 Measure the exact channel length to determine
the required length of lens.
2 If required, carefully cut the lens to length. Ensure
that any resulting burrs are removed.
3 Fit both end caps.
4 Insert one end of the lens against one of the end
caps so that it locates into the ‘Lens recess’ within
the channel (see right).
5 Once the first part of the lens has correctly
located, run your thumb gently along the length
of the lens to push the remainder into place.
Lens
recess
Locate the first section of
lens into the channel and
then run your thumb along
it to push the remainder into
place.
90
O
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...