![background image](http://html1.mh-extra.com/html/acclaim-lighting/ai-flex-interior/ai-flex-interior_user-manual_3695490031.webp)
29
www.acclaimlighting.com
5 At each end of the channel (underside),
insert
Mounting clips
into both of the
outer slots.
2 If necessary, carefully solder to the contact pads or use a feed/
Note: If you need to fit
Channel
end caps
, you will need to drill a hole in the end cap at
one end to allow the cables to pass thru.
3 Fit the Ai Flex tape to the channel (see
4 Fit the required lens (see page
6 Insert the channel into the mount
and gently push it up until the four
mounting clips all fully engage into
the main slot within the mount.
+24
V
W1
W2
W3
W4
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...