![background image](http://html1.mh-extra.com/html/acclaim-lighting/ai-flex-interior/ai-flex-interior_user-manual_3695490017.webp)
15
www.acclaimlighting.com
3 Ensure the tape mounting surface within the channel is completely dry, clean and free of
grease. If cleaning is required, please see page 4 for details.
4 Determine the length of tape required. Leave at least a 10mm gap at each
end to allow the end caps to be inserted. Mark the positions at each
end of the channel where the tape will be placed.
Note: Ai Flex tape can only be cut every 6.5” (166mm), which
may constrain the precise lengths of tape that can
be achieved. Therefore it may be beneficial to center
the tape within the channel to achieve an even
distribution.
5 Cut the tape to the nearest marked cutpoint.
6 Begin peeling the backing from the Ai Flex
tape and carefully stick the Ai Flex tape into
the channel, starting at the marked position.
IMPORTANT: While pressing the Ai Flex tape into position, take care not to put
excessive pressure on the components or connections.
10mm
+24
V
W1
W2
W3
W4
TO FIT THE AI FLEX TAPE
1 If necessary, cut the channel (and
Mounting rail
, if needed - remember to leave space for
the end caps) to the length required. Ensure that any resulting burrs are removed.
2 [Optional step] Slide in the
Mounting rail
to determine the required beam angle:
FLEX GRAZE CHANNEL (FLK GRZ)
The Flex graze channel is a low profile channel that, when used with its rounded lens
produces a linear spread of light suitable for grazing nearby surfaces. The supplied
mounting rail can be optionally used to alter the distance between the emitters and the
lens and thus determine the resulting beam angle (the beam angle is 10
o
as standard if the
mounting rail is not used). For channel dimensions, see page 32.
Options
Zinc
mounting
bracket
[FLK ZMB]
End cap
[FLK GRZ EC]
Flex graze channel plus Mounting rail
(3.28’ / 1m)
[FLK GRZ]
Lens
(3.28’ / 1m)
[FLK GRZ L]
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...