12
www.acclaimlighting.com
TO SURFACE MOUNT
1 Fit the Ai Flex tape to the channel (see page
2 At the end where the connection will take place,
fit an
End cap with hole
.
3 Feed the link cables through the end cap and
carefully solder to the contact pads, if necessary
(see page 5).
4 At the other end of the channel, fit a standard
End
cap
.
5 Fit the required lens (see page 14).
6 Attach two or more
Zinc mounting brackets
to the
mounting surface using screws appropriate to the
surface type.
7 Clip the pendant channel into the mounting
brackets using the slot closest to the rounded
back of the channel.
+24
V
W1
W2
W3
W4
Attach the
channel to the zinc
mounting brackets
Solder the link
cables to the
contact pads
Note: Ensure sufficient
strain relief where the
cables enter the channel.
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...