![background image](http://html1.mh-extra.com/html/acclaim-lighting/ai-flex-interior/ai-flex-interior_user-manual_3695490026.webp)
24
www.acclaimlighting.com
TO FIT THE AI FLEX TAPE
1 If necessary, cut the channel to the length required. Ensure that any resulting burrs are
removed.
2 Ensure the tape mounting surface within the channel is completely dry, clean and free of
grease. If cleaning is required, please see page 4 for details.
3 Determine the length of tape required. If necessary, leave a gap
at each end. Mark the positions at each end of the channel
where the tape will be placed.
Note: Ai Flex tape can be cut every 1” (25mm),
which may slightly constrain the precise lengths
of tape that can be achieved. Therefore it may be
beneficial to center the tape within the channel to
achieve an even distribution.
4 Cut the tape to the nearest marked cutpoint.
5 Note: If you are attaching the channel directly to a surface,
see ‘To surface mount directly’ on page 25
before
sticking the tape in place.
Begin peeling the backing from the Ai Flex tape and carefully stick the Ai Flex tape into
the channel, starting at the marked position.
IMPORTANT: While pressing the Ai Flex tape into position, take care not to put
excessive pressure on the components or connections.
+24
V
W1
W2
W3
W4
FLEX CHANNEL - LOW PROFILE/RECESSED/TALL (FLX444/777/888)
There are three options within the Flex channel range to suit varying installation
requirements: A low profile option; a recessed channel for concealment within surfaces and
a tall profile channel that reduces light spill. All three channels have a choice of clear, frosted
or opal lenses. For channel dimensions, see page 32.
Options
Flex channel low profile
(4’ / 1.21m)
[FLX444]
Flex channel tall profile
(4’ / 1.21m)
[FLX888]
Flex channel
recessed
(4’ / 1.21m)
[FLX777]
Tall profile lenses
(4’ / 1.21m)
[Clear: FLX825]
[Frosted: FLX813]
[Opal: FLX801]
Recessed lenses
(4’ / 1.21m)
[Clear: FLX727]
[Frosted: FLX715]
[Opal: FLX702]
Flat brackets/
joiners plus
2.5 x 10mm
wood screws
[FLX111]
Angled
brackets plus
2.5 x 10mm
wood screws
[FLX113]
Low profile lenses
(4’ / 1.21m)
[Clear: FLX LP CL4]
[Frosted: FLX LP FL4]
[Opal: FLX LP OL4]
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...