![background image](http://html1.mh-extra.com/html/acclaim-lighting/ai-flex-interior/ai-flex-interior_user-manual_3695490021.webp)
19
www.acclaimlighting.com
FLEX SWIVEL CHANNEL (FLK SWI)
This anodized aluminum channel allows a single strip of Ai Flex tape to be mounted close
to a surface and angled between 0 and 90
O
to suit your illumination purposes. Clear and
frosted lens options are available. For channel dimensions, see page 32.
Options
Lenses
(3.28’ / 1m)
[Clear: FLK MFC]
[Frosted: FLK MFL]
[Opal: FLK MOL]
Flex swivel channel
(3.28’ / 1m)
[FLK SWI]
Swivel
mounting
bracket
[SWI MB]
End cap
[FLK SWI EC]
TO FIT THE AI FLEX TAPE
1 If necessary, cut the channel (remember to leave space for the end caps) to the length
required. Ensure that any resulting burrs are removed.
2 Ensure the tape mounting surface within the channel is completely dry, clean and free of
grease. If cleaning is required, please see page 4 for details.
3 Determine the length of tape required. Leave at least a 10mm gap at each end to allow
the end caps to be inserted. Mark the positions at each end of the channel where the
tape will be placed.
Note: Ai Flex tape can only be cut every 6.5” (166mm), which may constrain the precise lengths
of tape that can be achieved. Therefore it may be beneficial to center the tape within the
channel to achieve an even distribution. If the section of Ai Flex tape you are using requires feed
cables to be attached, it will be necessary to solder new connections as the Flex
swivel channel is too small to accommodate feed or link connectors. You
will find it easier to solder the connections before fitting the tape into
the Flex swivel channel.
4 Cut the tape to the nearest marked cutpoint.
5 Begin peeling the backing from the Ai Flex
tape and carefully stick it into the
channel, starting at the marked
position.
IMPORTANT: While
pressing the Ai Flex
tape into position,
take care not to put
excessive pressure
on the components
or connections.
+24V
W4
W1
W3
W2
W2
W3
W1
W4
+24
10m
m
Summary of Contents for Ai Flex Interior
Page 1: ...User guide Ai Flex Interior...
Page 2: ......
Page 39: ......
Page 40: ...www acclaimlighting com...