98
PROGRAMMING
TIMER TO ON MODE
Pressing the up or down button sets a
countdown time. During the countdown,
your device will be set to OFF. Once the
timer ends, your device will trigger to turn
on. If there is a level set in OFF Mode,
the devices will run at that level during
the countdown and when triggered to
turn off.
The countdown will begin if no buttons
are pressed for 5 seconds. The time left
on the countdown is shown on the lower
right corner of the display above the
setting. Leaving the timer mode while the
countdown is running will pause it until
you return to this mode.
TIMER TO OFF MODE
Pressing the up or down button sets a
countdown time. During the countdown,
your device will be set to ON. Once the
timer ends, your device will trigger to turn
off. If there is a level set in OFF Mode,
the devices will run at that level after the
end of the countdown.
The countdown will begin if no buttons
are pressed for 5 seconds. The time left
on the countdown is shown on the lower
right corner of the display above the
setting. Leaving the timer mode while the
countdown is running will pause it until
you return to this mode.
TIMER TO ON
(COUNTDOWN END POINT)
START
20
m
in
. to
ON
Dev
ice
O
N
START
TIMER TO OFF
(COUNTDOWN END POINT)
40
m
in
. t
o O
FF
Dev
ice
O
FF
CONTROLLER 69 PRO
Summary of Contents for Advance Grow Tent Kit
