AC Infinity Advance Grow Tent Kit, User Manual

Page: 122 / 128

122
Can I connect different sized fans to the same controller?
Please refer to pages 86-87 for details on adding more fan units.
Q:
A:
Will I be able to use this controller with my own devices?
The CONTROLLER 69 PRO is only compatible with AC Infinity fans that use EC-motors.
Q:
A:
Does the controller retain its settings after power is shut off?
Yes. If the controller's power is cut off and is powered on afterwards, your settings will remain.
Q:
A:
My controller isn't pairing with the app. How do I fix this?
If the pairing process isn't successful, turn off your Bluetooth and re-enable it to try again.
When starting the pairing process around multiple Bluetooth controllers, move your smart
device closer to the controller you wish to connect the app with.
Q:
A:
FREQUENTLY ASKED QUESTIONS
How do I stop my device from turning on and off too quickly in AUTO MODE?
The figure set in the TRANSITION under SETTINGS will determine how the device ramps
up in levels when triggered to run in AUTO MODE. Set a transition threshold X. For every
multiple of X that has surpassed your trigger point, the device will increase by one level. The
lower the transition threshold is set to, the easier it will be for the device to ramp up in levels.
If set to zero, the device will jump to the max set speed without ramping when triggered.
This may cause the device to turn on and off quickly if the climate fluctuates back and forth.
Increase the transition threshold number to help smooth out the transitions. Check the points
of your high and low triggers, which can all activate concurrently. Turn off any triggers that
are not in use.
Q:
A:
How do I set a minimum speed for constant ventilation, that would ramp up
when triggered?
If a fan device is connected, the figure set in OFF MODE determines the fan speed when it’s
triggered to be OFF in all other modes. When the fan isn’t triggered ON, it will be considered
OFF and so it will run at that minimum speed continuously. Once triggered ON, it will change
its speed to the figure set under ON MODE. Q:
A:
CONTROLLER 69 PRO