AC Infinity Advance Grow Tent Kit, User Manual

Page: 96 / 128

96
PROGRAMMING
VPD MODE (HIGH VPD TRIGGER)
Pressing the up or down button sets the high VPD trigger. The devices will activate if the probe’s
reading meets or exceeds this threshold.
Once triggered, the devices will gradually ramp up to the level set in ON mode. If the probe’s
reading falls below this trigger point, the devices will gradually slow down to a stop or at the level
set in OFF mode.
You may set this trigger below the low VPD trigger to create a specific range in which the
devices are active.
CONTROLLER 69 PRO
Either of the two trigger points can activate while you are in VPD Mode, even if you are
viewing another trigger point. Set a trigger point to OFF if not in use, by holding down the
up and down button. If there is a level set in OFF Mode other than zero the devices will
run at that level when triggered to turn off.
ON OFF
TRIGGER POINT
HIGH VPD
HIGH VPD LOW VPD
0 kPa 9.9 kPa
1.1kPa