AC Infinity Advance Grow Tent Kit User Manual Download Page 110

Page: 110 / 128

110

PROGRAMMING

ALERT ICONS

The alert icons are displayed at the top of the screen. Icons may flash when the controller
signals an alert to notify you of any triggered function or alarm.

ADVANCE PROGRAMMING

Displays when an advance program set in the app is active. "ADV." will appear
and override the controller if an automation program is in use.

AUTO MODE ALERT

Flashes whenever any of the auto mode triggers (high temperature, low
temperature, high humidity, or low humidity) activate your devices.

TIMER ALERT

Flashes when a countdown has completed for TIMER TO ON, TIMER TO OFF,
CYCLE, or SCHEDULE Mode.

VPD ALERT

Flashes whenever either VPD mode triggers (high VPD or low VPD) activate
your devices.

CONTROLLER 69 PRO

Summary of Contents for Advance Grow Tent Kit

































































































































Search results

Summary of Contents for Advance Grow Tent Kit

Reviews:

Related manuals for Advance Grow Tent Kit

Brands by name

Popular brands

AC Infinity Advance Grow Tent Kit, User Manual

Search results

Summary of Contents for Advance Grow Tent Kit

Reviews:

Related manuals for Advance Grow Tent Kit

Brands by name

Popular brands