AC Infinity Advance Grow Tent Kit, User Manual

Page: 92 / 128

92
PROGRAMMING
AUTO MODE (HIGH TEMPERATURE TRIGGER)
Pressing the up or down button sets the high
temperature trigger. The devices will activate if the
probe’s reading meets or exceeds this threshold.
Once triggered, the devices will gradually ramp up
to the level set in ON mode. If the probe’s reading
falls below this trigger point, the devices will
gradually slow down to a stop or at the level set in
OFF mode.
You may set this trigger below the low temperature
trigger to create a specific range in which the
devices are active.
This is typically used with devices like air
conditioners and cooling fans to help lower the
temperature when it gets too hot. For example, if
you set a high temperature trigger of 70°F, then
your device will activate when the temperature
reaches 70°F or higher, and turn off when it falls
below 70°F. Products shown here may still be
in development.
Any of the four trigger points can
activate while you are in AUTO
Mode, even if you are viewing
another trigger point. Please set
a trigger point to OFF if not in
use, by holding down the up and
down button. If there is a level
set in OFF Mode other than zero,
the devices will run at that level
when triggered to turn off.
ON
HIGH TEMPERATURE
TRIGGER POINT
32 194
COLDER HOTTER
OFF
70
CONTROLLER 69 PRO