AC Infinity Advance Grow Tent Kit, User Manual

Page: 94 / 128

94
PROGRAMMING
AUTO MODE (HIGH HUMIDITY TRIGGER)
Pressing the up or down button sets the high
humidity trigger. The devices will activate if the
probe’s reading meets or exceeds this threshold.
Once triggered, the devices will gradually ramp up
to the level set in ON mode. If the probe’s reading
falls below this trigger point, the devices will
gradually slow down to a stop or at the level set in
OFF mode.
You may set this trigger below the low humidity
trigger to create a specific range in which the
devices are active.
This is typically used with devices like
dehumidifiers to help lower the humidity when
it gets too humid. For example, if you set a high
humidity trigger of 48%, then your device will
activate when the humidity rises to 48% or higher,
and turn off when it falls below 48%. Products
shown here may still be in development.
Any of the four trigger points can
activate while you are in AUTO
Mode, even if you are viewing
another trigger point. Please set
a trigger point to OFF if not in
use, by holding down the up and
down button. If there is a level
set in OFF Mode other than zero,
the devices will run at that level
when triggered to turn off.
CONTROLLER 69 PRO
ON
HIGH HUMIDITY
TRIGGER POINT
OFF
LESS HUMID MORE HUMID
48
0 100