AC Infinity Advance Grow Tent Kit, User Manual

Page: 93 / 128

93
PROGRAMMING
AUTO MODE (LOW TEMPERATURE TRIGGER)
Pressing the up or down button sets the low
temperature trigger. The devices will activate if the
probe’s reading meets or falls below this threshold.
Once triggered, the devices will gradually ramp up
to the level set in ON mode. If the probe’s reading
rises above this trigger point, the devices will
gradually slow down to a stop or at the level set in
OFF mode.
You may set this trigger above the high
temperature trigger to create a specific range in
which the devices are active.
This is typically used with devices like heaters
and seedling mats to help raise the temperature
when it gets too cold. For example, if you set a
low temperature trigger of 78°F, then your device
will activate when the temperature falls to 78°F
or lower, and turn off when it rises above 78°F.
Products shown here may still be in development.
Any of the four trigger points can
activate while you are in AUTO
Mode, even if you are viewing
another trigger point. Please set
a trigger point to OFF if not in
use, by holding down the up and
down button. If there is a level
set in OFF Mode other than zero,
the devices will run at that level
when triggered to turn off.
LOW TEMPERATURE
TRIGGER POINT
32 194
COLDER HOTTER
ON OFF
78
CONTROLLER 69 PRO