AC Infinity Advance Grow Tent Kit, User Manual

Page: 121 / 128

121
FREQUENTLY ASKED QUESTIONS
What devices are compatible with the CONTROLLER 69 PRO?
All AC Infinity devices that contain a UIS connector are compatible. If your AC Infinity device
has a 4-pin Molex connector and an EC-Motor, it may still be compatible with the use of an
UIS adapter to convert its connector to fit with the controller. Q:
A:
Where is the best place to position the sensor probe?
Place the sensor probe as close as possible to the hottest or most humid spot in your space.
Q:
A:
What does “level” refer to in the controller and app?
The level represents the intensity the device is running at. This is represented by a digit
0 to 10. Zero means the device is off, and 10 represents its running at its maximum. For
fan devices, the level would be referring to its speed. For light devices, the level would be
referring to its brightness. Note that on and off devices do not have a level setting.
Q:
A:
Do I need to remove the plastic cap from the probe?
Yes. You will need to remove the plastic cap so the probe can accurately read
climate conditions.
Q:
A:
Why is my device is not turning off when the programming is triggering it to be off?
The figure set in OFF Mode determines the device’s level when it’s triggered to be OFF in all
other modes. Set this figure to zero if you want the device to turn off when triggered OFF.
If this is occurring in AUTO Mode, check the points of your high and low triggers, which can
all activate concurrently. Turn off any triggers that are not in use. If you are using the app,
check to see if any ADVANCE programming is active, which can override any
control programming.
Q:
A:
Why does my device not run or run at a low level when the programming is triggering
it to be on?
The figure set in ON Mode determines the device’s level when it’s triggered to be ON in all
other modes. Make sure this figure is not set to zero or the device will not run when triggered
to be ON.
If this is occurring in AUTO Mode, check the points of your high and low triggers, which can
all activate concurrently. Turn off any triggers that are not in use. If you are using the app,
check to see if any ADVANCE programming is active, which can override any
control programming.
Q:
A:
CONTROLLER 69 PRO