AC Infinity Advance Grow Tent Kit, User Manual

Page: 95 / 128

95
PROGRAMMING
AUTO MODE (LOW HUMIDITY TRIGGER)
Pressing the up or down button sets the low
humidity trigger. The devices will activate if the
probe’s reading meets or falls below this threshold.
Once triggered, the devices will gradually ramp up
to the level set in ON mode. If the probe’s reading
rises above this trigger point, the devices will
gradually slow down to a stop or at the level set in
OFF Mode.
You may set this trigger above the high humidity
trigger to create a range in which the devices
are active.
This is typically used with devices like humidifiers
to help raise the humidity when it gets too dry. For
example, if you set a low humidity trigger of 57%,
then your device will activate when the humidity
falls to 57% or lower, and turn off when it rises
above 57%. Products shown here may still be
in development.
Any of the four trigger points can
activate while you are in AUTO
Mode, even if you are viewing
another trigger point. Please set
a trigger point to OFF if not in
use, by holding down the up and
down button. If there is a level
set in OFF Mode other than zero,
the devices will run at that level
when triggered to turn off.
CONTROLLER 69 PRO
LOW HUMIDITY
TRIGGER POINT
ON OFF
LESS HUMID MORE HUMID
57
0 100