Abicor Binzel ABIMIG SpinArc, Operating Instructions Manual

Page: 24 / 48

EN - 2
ABIMIG
®
SpinArc
®
EN Translation of the original operating instructions
© he manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 CE marking EN-3
2 Safety EN-3
2.1 Designated use EN-3
2.2 Obligations of the operator EN-3
2.3 Personal protective equipment (PPE) EN-3
2.4 Classification of the warnings EN-4
2.5 Emergency information EN-4
3 Product description EN-4
3.1 Technical data EN-4
3.2 Abbreviations EN-5
3.3 Signs and symbols used EN-5
4 Scope of delivery EN-5
4.1 Optional accessories: EN-6
4.2 Transport EN-6
4.3 Storage EN-6
5 Functional description EN-7
5.1 Flexure mounting tool EN-7
5.2 Cable assembly EN-7
5.3 Control device EN-7
5.4 Control lead EN-7
5.5 Trigger control cable EN-7
6 Putting into operation EN-7
6.1 Mounting the welding torch system EN-8
6.1.1 Mounting the contact tip EN-8
6.2 Connecting the torch to the wire feeder EN-8
6.2.1 Mounting the torch EN-9
6.2.2 Mounting the control device EN-9
6.2.3 Connecting the control cable with the
wire feeder and/or optional accessories
EN-10
7 Operation EN-10
7.1 Setting the control device EN-11
7.1.1 Setting the mode: EN-11
7.1.2 Direction of rotation EN-11
7.1.3 Delaying the start of rotation EN-11
7.2 Torch adjustments EN-12
7.2.1 Adjusting the rotation diameter EN-12
8 Putting out of operation EN-13
9 Maintenance and cleaning EN-14
9.1 Replacing the contact tip EN-15
9.2 Tip adaptor EN-16
9.3 Replacing the liner EN-17
9.4 Cam EN-17
9.5 Control device EN-17
9.6 Flexure EN-17
9.6.1 Flexure fasteners EN-18
10 Troubleshooting EN-18
11 Disassembly EN-22
12 Disposal EN-22
12.1 Materials EN-23
12.2 Consumables EN-23
12.3 Packaging EN-23