ABIMIG
®
SpinArc
®
6 Putting into operation
EN - 9
6.2.1 Mounting the torch
1
at the clamping area
in the middle and secure it in the relevant system.
6.2.2 Mounting the control device
1
Set the control device
to OFF and connect it to an earthed input power circuit.
2
Attach the orange control lead
to the torch and the control device and carefully tighten both ends
manually.
3
to OFF.
4
Securely connect the control and power cable and switch the control device to ON.
1
Clamping area
2
Torch body
Fig. 3
Mounting the torch
1
2
1
Control device
2
Rotational speed display
3
Rotation switch
4
Control lead
5
Trigger control cable
Fig. 4
Mounting the control device
NOTICE
• To avoid interference, do not place the control device in the vicinity of high-frequency devices.
NOTICE
• The rotational speed indicator
must light up.
10 Troubleshooting on page EN-18
5
1
2
3
4
