ADDENDUM
3
Displays field device status based on results of continuous self-diagnostics.
1. Changes engineering units.
2. Sets lower and upper range values of primary and secondary units.
3. Changes the output dampening.
1. Sets output to a fixed value.
2. Cancels a fixed output.
3. Sets up LCD - select display units to be displayed on the field device LCD.
4. Changes device configuration to the standard configuration (PTS only).
NOTE: For special feature functions for the Type AVS Smart Positioner, refer
to Appendix A.
Escapes the current function and returns the display to the READY condition.
Selects and changes working configurations and field devices (if connected).
Steps through the selections of the working configuration. Views a configura-
tion, but does not allow modifications to be made.
1. Sets the language of the display screens.
2. Sets the communication format.
3. Displays the amount of charge left on the battery pack.
4. Displays the STT04 name.
Returns to a previous screen during configuration, calibration, rerange, etc.
Table 1. Keypad Functions(continued)
Old Key
New Key
Function
S TAT U S
R E -
R A N G E
S P E C IA L
F E AT U R E
C L E A R
S E L E C T
D E V IC E
V IE W
O P T IO N S
B A C K
