SMART POSITIONER
CREATE/MODIFY CONFIGURATION
A - 2
Key
Display
Comments
Select
NEW
to create a configuration
.
To modify an
existing configuration, select
MODIFY.
The screen
sequence is the same, however, the
MODIFY
screens will appear with the values and cursor posi-
tions as originally configured.
Select
ABB FSK
.
Use the down arrow key to select
Positioner
.
Enter a name for the configuration ID tag using up to
14 ASCII characters. To select a character, press the
key that has the desired character. Continue to press
the key until the desired character appears. Use the
right arrow key to move to the next character. Use
the left arrow key to go back to the previous charac-
ter.
Select
DIGITAL
. Use the up and down arrow keys to
select mode.
NOTE:
The
DIGITAL
selection should only be made
when using an IMFBS01 field bus I/O module. Select
ANALOG
for all other cases.
This screen only appears in the
DIGITAL
mode
.
It is
used to assign an address to the positioner for use
with the field bus.
C O N F IG
CONFIGURATION
→
NEW
MODIFY
ERASE
E N T E R
DEVICE TYPE
→
ABB FSK
HART
E N T E R
TRANSMITTER TYPE
PTS
EQS
BCN
EQN
→
AVS
TBN480 cond
E N T E R
STT04 CONFIGURATION
[
]
←
PREVIOUS NEXT
→
E N T E R
SELECT MODE:
ANALOG
→
DIGITAL
E N T E R
ENTER CHANNEL #:
nn
