TB82 TRANSMITTER
CREATE/MODIFY CONFIGURATION
N
-
3
Enter a day and press
. Enter a month and
press
. Enter a year.
This date can represent the creation date of the con-
figuration, the date the device or element was
installed, or some other significant date.
Select
Linear
.
The
OUTPUT TYPE
screen does not appear when
the transmitter type is
TB82 CONC
.
NOTE:
Remote communications do not support the
function generator feature for the TB82. Function
generator output points must be specified locally at
the device.
Enter a value between 0 and 100. Damping is used
to smooth out a noisy signal. Use a low value for a
clean signal and a higher number for noisy signals.
Default setting is 0.5 seconds.
The
DAMPING
screen does not appear when the
transmitter type is
TB82 CONC
.
Input lower range value (4 mA) using the arrow keys,
then press
. Input the upper range value
(20 mA).
The range values screen does not appear when the
transmitter type is
TB82 CONC
.
Select a temperature compensation type.
This screen appears for TB82 pH.
NOTE:
AUTO SOL. (ADV)
is only available for TB82
transmitters operating in advance mode.
Enter a temperature.
This screen appears for TB82 pH and only if
MAN-
UAL
is the temperature compensation type.
Select
YES
.
Key
Display
Comments
E N T E R
DATE:
DAY: nn
MONTH: nn
YEAR: nnnn
ENTER
ENTER
E N T E R
OUTPUT TYPE:
→
LINEAR
FUNC GENERATOR
E N T E R
DAMPING:
(0 - 100 sec)
E N T E R
LOWER RANGE VAL
nn.nn UNITS
UPPER RANGE VAL
nn.nn UNITS
ENTER
E N T E R
TEMP COMP TYPE
→
MANUAL
AUTOMATIC
AUTO SOL. (ADV)
E N T E R
ENTER
TEMPERATURE:
nn.nn UNITS
E N T E R
STORE THIS
CONFIGURATION?
NO
→
YES
