ABB RELION 650 SERIES, Engineering Manual, Page: 76 / 110

Category IEC Symbol Name Symbol
Type
IEC Symbol
Definitions
ANSI Y32.2/
IEEE 315
Symbol
Definitions
Function Block
Type
Texts Selector switch indicate,
00 = Middle position
38 SLGGIO
Selector switch indicate,
01 = Open
Selector switch indicate,
10 = Closed
Selector switch indicate,
11 = Undefined
Others Resistor 39
Others Star point 40
Others Field winding 41
6.2.3 Bay configuration engineering
GUID-0D9CFE29-F00B-450F-9802-F461112B1CF4 v6
A page with a single line diagram and measurements contains active living objects. The object
values are updated by the IED periodically (measurement) or in case of an event. Once the
symbols are placed on the HMI page they must be linked to the corresponding function block
in the application configuration, which protects or controls the object that the symbol on the
HMI page represents.
Creating a complete HMI display page
Procedure:
1. Make a sketch how to present the single line diagram.
2. Place the apparatus, transformer and other symbols that are needed for the single line
diagram into the raster boxes.
3. Add connection points where needed.
4. Link the apparatus symbols with line elements.
5. Adjust the text symbols while writing to north, east, south or west. Use the object
property window to do it.
6. Place measurements when needed.
7. Edit the name, unit and number of decimals of the measurements.
8. Select each object that has a dynamic link and do the link to the corresponding process
object, see Figure 57 .
9. Check to select the correct function block. Function blocks of the same type can have
different instance numbers.
10. Validate that all links are done.
11. Save the complete picture.
12. Repeat the steps for all pages when more than one is needed.
13. Write the display configuration to IED from the GDE tool.
Section 6 1MRK 511 284-UEN B
Local HMI engineering
70 650 series
Engineering manual
© Copyright 2013 ABB. All rights reserved