The visible display for a single line diagram is organized in a raster of 13 x 8 (columns x rows).
Each symbol presented by 24 x 24 pixels included by the drag and drop method must be
dropped in a raster box. The apparatus object name can be placed in all four directions around
the symbol. The name is part of the apparatus object.
Handling text
The raster switches when text is selected in a raster of 45 x 15 (columns x rows). One raster
box is the placeholder for one character. A text element must be placed in the position of the
raster. The signal name can changed either by double click or via the property window. Unit
and scaling of the signal can only be changed via the property window.
Select and toggle
Show Texts using the IED Fonts to get a view how it will look like later on the
real HMI display.
Doing Link to draw lines
The line width has to fit to the line width used for the symbols. The standard size is 2. Choose
the line width in a selection box placed in the upper area above the page. A line that is not
connected to a symbol may be done in any line width in the range 1 - 5. But it needs to be
simple connection points to be drawn.
For the procedure to draw lines when the apparatus symbols are placed, see
.
1.
Place the apparatus or transformer symbols by drag and drop in a raster box.
2.
Place the connections symbols by drag and drop in a raster box.
3.
Click the
Link icon to enable direct line drawing.
4. Center the mouse pointer on the center of a connection point; visible in two circles at the
endpoints of a line, to draw a line.
5. Click to start and move the mouse pointer to the destination connection point. Center
once again the mouse pointer and click to drop the line.
6. Draw all line elements that are necessary.
7.
Click
Select in the menu bar to finish the line drawing.
IEC05000598-2-en.vsd
IEC05000598 V2 EN-US
Figure 56: GDE: Drawing a line
6.2.2
Supported single-line diagram symbols
GUID-AA86E5A0-4060-436A-93A9-D5901F91BD09 v3
Section 6
1MRK 511 284-UEN B
Local HMI engineering
64
650 series
Engineering manual
© Copyright 2013 ABB. All rights reserved