PCM600 interacts with IET600 by importing and exporting SCL files. The built in tool
can be used for small projects (about 10 IEDs) including ABB IEDs only.
•
Organizing GOOSE messages received and managing the used IO signal is done by
using the Signal Matrix tool.
•
Communication engineering for the DNP3 protocol by using the Communication
Management tool.
•
Communication engineering for the IEC 60870-5-103 protocol by using Application
Configuration tool and Parameter Setting tool.
•
Disturbance record management
•
Generating overviews about the available (disturbance) recordings in all connected
protection IEDs by using the Disturbance Handling tool.
•
Manually reading the recording files (in COMTRADE format) from the protection IEDs
by using the Disturbance Handling tool or automatically by using the PCM600
scheduler.
•
Managing recording files with the assistance of the Disturbance Handling tool.
•
Creating overview reports of recording file content for fast evaluation with
assistance of the Disturbance Handling tool.
•
Service management
•
Monitoring selected signals of an IED for commissioning or service purposes by
using the Signal Monitoring tool.
•
Listing all actual existing IED internal events by using the Event Viewer tool.
•
Listing all actual pending process events as they are stored in the IED internal
disturbance report event list by using the Event Viewer tool.
IEC08000100.vsd
PCM600
IED Engineering Management
Project
ACT
SMT
HWT
GDE
PST
Communication Management
CMT
Operator Disturbance Record Management
DRH
Service Management
MON
EVT
SMT
IEC08000100 V1 EN-US
Figure 3:
Organization of PCM600 in different management tasks
Additional functionality to manage the project and to organize the user rights:
•
PCM600 user management
1MRK 511 284-UEN B
Section 2
Engineering tool set
650 series
15
Engineering manual
© Copyright 2013 ABB. All rights reserved