ABB RELION 650 SERIES Engineering Manual Download Page 44

Page: 44 / 110

IEC08000366.vsd

IEC08000366 V1 EN-US

Figure 27: PCM600: Selecting IED from template library

Select the IED from the list of available IEDs.

4. Click the icon in the right column of the list of available templates to open the

Template

Properties. Verify the template information, see

Figure 28

and click

Close to close the

window.

IEC08000367.vsd

IEC08000367 V1 EN-US

Figure 28: PCM600: IED Template Properties

5. Click

Delete Template to delete the template, click Import Template to import a template

from the selection window or click

Create to insert the selected IED to the bay, see

Figure

It is possible to insert more than one IED from the

Create New Object from

Template window and the selection window remains open until the user

clicks

Close.

Inserting a configured IED in 650 series

Configured IEDs in 650 series in PCM600 are available as *.pcmi files and include all

information that is related to the IED object in PCM600. The configured IEDs in 650 series is

Section 4

1MRK 511 284-UEN B

Setting up a project

650 series

Engineering manual

Summary of Contents for RELION 650 SERIES













































































































Search results

Summary of Contents for RELION 650 SERIES

Reviews:

ABB RELION 650 SERIES, Engineering Manual, Page: 44 / 110

Search results

Summary of Contents for RELION 650 SERIES

Reviews: