Creating a new project
Procedure
1.
Select
File and Open/Manage Project ... to see the projects that are currently available in
the PCMDataBases.
2.
Open
Projects on my computer.
3.
Click the icon
New Project. To create new project currently open projects and object tools
shall be closed.
4. The
New Project window opens, see
en05000609.vsd
IEC05000609 V1 EN-US
Figure 15: PCM600: Create a new project window
5. Name the project and include a description (optional) and click
Create.
6. PCM600 sets up a new project that will be listed under
Projects on my computer.
4.6
Building a plant structure
SEMOD58409-5 v5
The plant structure is used to identify each IED in its location within the substation
organization. It is a geographical image of the substation and the bays within the substation.
The organization structure for the IEDs may differ from the structure of the primary
equipment in the substation. In PCM600 it is possible to set up a hierarchical structure of five
levels for the IED identification.
Build up the plant structure according to the project requirements. PCM600 offers several
levels to build the hierarchical order from Center down to the IEDs in a bay.
The following levels are available:
1.
Project = Project name
2.
Substation = Name of the substation
3.
Voltage Level = identifies to which grid type or part in the substation the IED belongs to
4. Bay = Bay within the voltage level
5. IED = selection of the IED, which is used in the bay. Several IEDs are possible within a bay,
for example one control IED and two protection IEDs.
Section 4
1MRK 511 284-UEN B
Setting up a project
28
650 series
Engineering manual
© Copyright 2013 ABB. All rights reserved