88
Preparing for test
Chapter 13
Verifying settings by secondary
injection
Test/TestMode/DisturbReport
Table 8:
Disturbance report settings
2.8
Identifying the function to test in
the technical reference manual
The user can use the technical reference manual (TRM) to identify function blocks, logic dia-
grams, input and output signals, setting parameters and technical data.
Operation
DisturbSum-
mary
Then the results are...
Off
Off
•
Disturbances are not stored.
•
LED information is not displayed on the HMI and not stored.
•
No disturbance summary is scrolled on the HMI.
Off
On
•
Disturbances are not stored.
•
LED information (yellow - start, red - trip) are displayed on the local
HMI but not stored in the terminal.
•
Disturbance summary is scrolled automatically on the local HMI for the
two latest recorded disturbances, until cleared.
•
The information is not stored in the terminal.
On
On or Off
•
The disturbance report works as in normal mode.
•
Disturbances are stored. Data can be read from the local HMI, a
front-connected PC, or SMS.- LED information (yellow - start, red - trip)
is stored.
•
The disturbance summary is scrolled automatically on the local HMI for
the two latest recorded disturbances, until cleared.
•
All disturbance data that is stored during test mode remains in the ter-
minal when changing back to normal mode.
Summary of Contents for REB 551-C3*2.5
