Also check for fi rewalls or routers blocking outgoing
communications. If this is the case, please allow (or request
your IT department to allow) the following outgoing address
on your fi rewall:
fl exclock.payrollservers.us port
. The
FlexClock makes outbound TCP connections on port 8289,
and does not need to accept any inbound connections.
Please note that if you try to access this address with a web
browser, no page will be displayed and you may receive an
error message from your web browser. This is normal.
DNS Error
This message can have multiple causes, but often results
from mistakes when entering manual IP address parameters,
or from problems with your Internet connection.
Specifi cally, it means that the clock could not use your
Internet connection to look up “fl exclock.payrollservers.us”.
Frozen Screen
Press the number seven (7) on the keyboard of the FlexClock
or disconnect and reconnect the power to restart it. (This
won’t erase any punch information.)
Already Sending
There is an ongoing connection between the server and
the FlexClock, please allow it to fi nish. If this continues for
a period longer than 10 minutes restart the FlexClock by
pressing the seven (7) key on the keyboard.
Also check for fi rewalls or routers blocking outgoing
communications. If this is the case, please allow (or request
your IT department to allow) the following outgoing address
on your fi rewall:
fl exclock.payrollservers.us port
. The
FlexClock makes outbound TCP connections on port 8289,
and does not need to accept any inbound connections.
Please note that if you try to access this address with a web
browser, no page will be displayed and you may receive an
error message from your web browser. This is normal.
DNS Error
This message can have multiple causes, but often results
from mistakes when entering manual IP address parameters,
or from problems with your Internet connection.
Specifi cally, it means that the clock could not use your
Internet connection to look up “fl exclock.payrollservers.us”.
Frozen Screen
Press the number seven (7) on the keyboard of the FlexClock
or disconnect and reconnect the power to restart it. (This
won’t erase any punch information.)
Already Sending
There is an ongoing connection between the server and the
FlexClock, please allow it to fi nish. If this message continues
for a period longer than 10 minutes restart the FlexClock by
pressing the seven (7) key on the keyboard.
FlexClock
Multi-Purpose Time Device
FlexClock
Multi-Purpose Time Device
Setup Guide
Setup Guide
