Installation checklist 73
The external control connections to the inverter are OK (refer to
on page
The external line circuit breakers have correct ratings (refer to
on page
The AC distribution board is installed, wired and inspected correctly, and according to
local regulations.
The external AC distribution board and its line circuit breakers and fuses can be
accessed.
All shrouds and covers are in place and secured.
Control installation
(refer to
on page
and
on page
)
If external monitoring or control is used, make sure that:
A suitable communication cable is used (refer to
The daisy-chaining of the communication cable is correct (refer to
on page
Daisy-chaining EIA/RS-485 transmission lines
on page
The remote monitoring setups are properly configured and tested (refer to
).
If a datalogger connection to the internet is used, the internet connection operates.
Serial numbers of installed inverters:
Installation checked (DD/MM/YYYY):
Installer signatures:
Electrical installation
(refer to
Electrical installation
on page
49
)
Summary of Contents for PRO-33.0-TL Series
