22
M N S - U P
SER V I C E M A N UA L
5.2
Recommended packing methods
The sections are protected by suitable packaging during transport and possible intermediate storage.
5.2.1
The packing for normal road transport
Transport frame consisting of:
• standardized or euro pallet
• plastic strips
• plastic film
• edge protection
The section are to be placed on standardized pallet. The sections are to be wrapped by plastic film and fixed with the
cuplastic strips to the palIets. Edges of transport section are protected by standardized edge protection.
Stripping tape
Corner protection
Transport section
wraped with plastic foil
Figure 5-03 Packing for normal road transport
Standardized pallets are suitable for handling by forklit trucks. To protect them against moisture, the switchgear sections
shall be encased in a foil. A protective drying agent (such as silicagel) shall be provided between the foil and the switchgear.
This shall last for 12 or 24 months.
Summary of Contents for MNS-Up
