Refitting the external cable chain terminal covers
Use this procedure to refit the external cable chain terminal cover.
Refitting the external cable chain terminal cover
Note
Action
xx2200000839
Refit the cover and secure with the screws.
1
Screws:9ADJ100086P0257 ISO 7380
M6x12 Class 10.9 (3 pcs)
Screws: ISO 7380-2 M6x12 Class 10.9 (3
pcs)
Tightening torque: 8 Nm
Concluding procedure
Note
Action
DANGER
Make sure all safety requirements are met when
performing the first test run. See
may cause injury or damage on page 29
1
284
Product manual - IRT 710
3HKA00000186299-001 Revision: B
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.4.1.2 Replacing the cable chain terminal covers
Continued
Summary of Contents for IRT 710
