ABB i-bus VC/S 4 1 Series, Product Manual, Page: 120 / 199

ABB i-bus® KNX PARAMETERS
7.4.112 Send status values [window contact]
This parameter is used to define when the value of the following group object is sent on the bus
(ABB i-bus® KNX):
•
Window contact
Note
Sending on request can be triggered by the reception of a telegram with the value 0 or 1 on group ob-
ject
Request status values .
Option
After change
The value is sent if there is a change.
After change or cyclically The value is sent after a change or cyclically. The cycle time can be set.
The following dependent parameters are shown:
•
Send cyclically every
Prerequisites for visibility
• Parameter window Channel X \ Parameter window Input x \ Parameter Input \ Option Window
contact
• The parameter is in the parameter window
Channel X
\ parameter window
Input x
.
7.4.113 Send status values [fill level alarm]
This parameter is used to define when the value of the following group object is sent on the bus
(ABB i-bus® KNX):
•
Fill level alarm
Note
Sending on request can be triggered by the reception of a telegram with the value 0 or 1 on group ob-
ject
Request status values
.
Option
After change
The value is sent if there is a change.
After change or cyclically The value is sent after a change or cyclically. The cycle time can be set.
The following dependent parameters are shown:
•
Send cyclically every
Prerequisites for visibility
• Parameter window Channel X \ Parameter window Input x \ Parameter Input \ Option Fill level sensor
• The parameter is in the parameter window Channel X \ parameter window Input x .
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 120
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page